DVR with radar detector and GPS informant INCAR SDR-40

The combo device INCAR SDR-40 Tibet is an affordable solution that combines a car DVR for recording video with FullHD resolution and a radar detector for warning about radars and stationary cameras from the GPS base. The device is equipped with a display that displays information about the current state of the operating mode, information when working on the radar or camera, as well as the display is necessary to view the video on the spot and configure functions.

The INCAR SDR-40 Tibet video recorder and radar detector is equipped with a quick-release mount with active charging, and a capacitor is used as a battery. The capacitor does not allow the device to work offline, but at the same time it is the best solution when working in conditions with low or high temperatures.

This combo device will allow you not only to receive a warning about the installed camera or radar in time, but also to record important events on the built-in video recorder.

Update

1. Install the memory card in the card reader.
2. Format the memory card (the card must be clean)
3. Extract the update file from the archive and copy it to the root directory of the SD card
4. Install the memory card in the switched off device.
5. We connect the regular charger and turn on the ignition of the car.
6. The firmware process will occur automatically, we do not touch the screen and power of the device.
7. After successful firmware, the device will reboot itself.

User manual

Attention!

• Before using the recorder, start the car engine, then plug the recorder into the car's electrical network (cigarette lighter).
• Use the charger that comes with the recorder, otherwise the device may be damaged or out of order.
• Use high-quality memory cards with a high write speed of at least class 10.
• Do not use force to insert the memory card.
• Do not leave the device in a car at extremely low or high temperatures.