DVR INCAR SDR-180 Manhattan Ultra HD 4K with signature radar detector and GPS informer

The combo device Incar SDR-180 Manhattan is quite an affordable solution that combines a car DVR for recording video with UltraHD 4K resolution 3840 × 2160 and a radar detector for warning about radars and stationary cameras from the GPS base. The device is equipped with a display that displays information about the current state of the operating mode, information when working on the radar or camera, as well as the display is necessary to view the video on the spot and configure functions. The new 6-layer lens with SONY Exmor-R wide-angle lens, Sony 335 5MP sensor and removable CPL filter allows you to shoot in UltraHD 4K resolution 3840×2160 with the highest possible video quality.

The Incar SDR-180 Manhattan Signature Radar Detector is a new generation radar with a built-in module that removes unnecessary interference and only responds to police radar signals.
A signature is a feature of an electronic speed meter, like a unique human signature (signature). Any radar can be identified by its signature against the background of interference, airborne noise and signals from similar devices, while determining a specific type of radar.

DVR and radar detector Incar SDR-180 Manhattan is equipped with a magnetic mount with active charging. It is very convenient to watch videos using a mobile application by connecting to the device via Wi-Fi.

This combo device will allow you not only to receive a warning about the installed camera or radar in time, but also to record important events on the built-in video recorder. MicroSD memory cards from 8 to 128 GB, not lower than class 10, must be purchased separately.

An additional Incar VDC-170R camera can be connected to the combo device (sold separately). The camera can be placed in the car on the rear window to capture the traffic situation or on the windshield to record what is happening in the cabin.

Update

1. Install the memory card in the card reader.
2. Format the memory card (the card must be clean)
3. Extract the update file from the archive and copy it to the root directory of the SD card
4. Install the memory card in the switched off device.
5. We connect the regular charger and turn on the ignition of the car.
6. The firmware process will occur automatically, we do not touch the screen and power of the device.
7. After successful firmware, the device will reboot itself.

Attention!

• Before using the recorder, start the car engine, then plug the recorder into the car's electrical network (cigarette lighter).
• Use the charger that comes with the recorder, otherwise the device may be damaged or out of order.
• Use high-quality memory cards with a high write speed of at least class 10.
• Do not use force to insert the memory card.
• Do not leave the device in a car at extremely low or high temperatures.

User manual